1. ResMed Asia Product Support
  2. Technical Service
  3. Troubleshooting on AirSense 10, AirStart, AirCurve, Lumis

The following message is displayed on the device: "Tubing blocked, check your tubing"

AirSense 10, AirStart, AirCurve, Lumis


Possible Cause:

  • Air tubing blocked
  • Water on flow sensor
Solution:
  • Check air tubing and remove any blockages. Press dial to clear message
  • Allow sensor to dry and recalibrate and test device
  • Replace main PCB if the above solutions do not work