Sizing frame
1. Use the template provided as a guide to which frame size is most suitable.
2. If you try the standard size on your patients first, and the elbow sits behind the centre of their head, it’s too large.
3. If the frame is too large, try the small size frame for a better fit.
4. If you try the small size on your patients first, and the elbow sits in front of the centre of their head, it’s too small.
5. If the frame is too small, try the standard size frame for a more comfortable fit.
Sizing cushion
1. Use the provided template and your judgment to determine whether a patient has a narrow or wide nose.
2. If the patient has a narrow nose, place the blue/red side of the template under their nose. If the patient has a wide nose, place the black/purple side of the template under their nose.
3. Assess whether their nose falls inside or exceeds the width or length margins on the template to determine their cushion size.
4. Select the matching cushion from those provided.
Fitting your patient with AirFit N30i
1. Pull the frame and headgear over your patient’s head until the elbow is positioned on top and the headgear is behind their head.
2. Place the cushion under the patient’s nose.
3. Tighten or loosen the headgear until the cushion fits comfortably under their nose.
4. Squeeze the side buttons on the elbow and detach from the frame. Connect the air tubing from the device to the elbow, then reattach to the frame.
These instructions are for general information purpose only. For full details please consult the user guide.
Managing leak AirFit N30i
1. Locate where the air is escaping from, which is typically above or below the patient’s cushion.
2. Adjust the cushion by gently pulling it away from the patient’s face and letting it reseal itself.
3. Adjust the headgear as needed to achieve a more secure seal.
4. Check the frame is secure and that the mask elbow and tubing are not pulling on the mask.
These instructions are for general information purpose only. For full details consult the user guide.
