AirFit™ P10 Headgear Tips

ResMed AirFit™ P10 headgear tips and headgear clip tips

  • The headgear is designed to split open into a lower and an upper strap.
  • When the headgear is on, it should not be wrapped only behind your head. If it is, bring the top half up so that it sits on your crown.
  • When the headgear is on, it should not be resting only on your crown. If it is, pull the lower strap down to the back of your head.
  • Ensure that the headgear is not tangled or twisted.

Headgear Clip Tips

  • If the headgear seems too large, headgear clips are available to help you adjust the length of the split-strap for a better fit.
  • Attach the clips by threading either the lower or upper headgear strap through its opening.
  • Try the headgear on, and adjust the strap length with the clips until it is comfortable. For a tighter fit, shorten the straps. For a looser fit, lengthen the straps.
  • Note: Do not over tighten your headgear