AirTouch™ F20
      Back to home
      1. ResMed Asia Product Support
      2. Masks
      3. AirTouch™ F20

      Fitting your AirTouch F20

      ResMed AirTouch™ F20 | Full Face Mask|Putting on the AirTouch™ F20 | How to wear your mask|Fitting tips|

       

      1. Unclip the EasyClick Magnets.
      2. With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck and the top of the headgear would be on your crown.
      3. Bring each of the EasyClick magnets up to meet their corresponding clips on the frame.
      4. Adjust the tabs on the upper headgear.
      5. Adjust the tabs on the lower headgear.
      6. With your device still switched off, connect your device tubing to your mask elbow.
      7. Connect the elbow to your mask.

        To ensure your fit will work with your therapy:
      8. Switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
      9. Adjust your upper straps.
      10. Adjust your lower straps.
      11. Practice reseating your cushion – to do this, turn off your device, pull your mask away from your face, allow your cushion to reassume its natural shape, and then resettle your cushion on your face, with the top of the cushion sitting at the top of your nasal bridge.

        These instructions are for general information purpose only. For full details, consult the user guide.
        AirTouch F20 User Guide