- ResMed Asia Product Support
- Masks
- AirFit™ F20
Assembling your AirFit™ F20
ResMed AirFit™ F20|Full Face CPAP mask| Putting your mask back together| Mask assembly tips|
Step 1 - Attach cushion to frame by aligning the circular openings and pushing together until retained.
Step 2 - With the ResMed logo on the headgear facing outside and upright, attach the EasyClick Magnets.
Step 3 - Thread the upper headgear straps into the frame slots from the inside. Fold them over to secure.
Step 4 - Connect elbow to mask frame.
Step 2 - With the ResMed logo on the headgear facing outside and upright, attach the EasyClick Magnets.
Step 3 - Thread the upper headgear straps into the frame slots from the inside. Fold them over to secure.
Step 4 - Connect elbow to mask frame.