Troubleshooting on AirSense 10, AirStart, AirCurve, Lumis
      Back to home
      1. ResMed Asia Product Support
      2. Technical Service
      3. Troubleshooting on AirSense 10, AirStart, AirCurve, Lumis

      The following message is displayed on the device: "System fault, refer to user guide, Error 013 Description: Pressure sensor drift"

      AirSense 10, AirStart, AirCurve, Lumis

      Possible Cause:

      • Device out of calibration 
      • Faulty pressure sensor
      Solution:
      • Recalibrate device
      • Replace main PCB if the above solution does not work